Inline Swivel MJIC x FJIC

Hydraulics, Inc – Design Features

• Hardened carbon steel barrel and stem – Large wear surface


• Protective treatment – Zinc Plating with Yellow Chromate RoHS compliant finish


• Chrome retainer balls – Long life


• Standard O-Ring and back up ring – Field replaceable seal kits


• Optional GREASE FITTING


• Burnished barrel bore – Extends seal life


• Optional seal material


• Low pressure drop


• Low rotational torque

Pressure Limitations:

• Maximum working pressure for “S” Series swivels is 3,000 psi (20.7 Mpa); however, connecting plumbing may be rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest rated component therein.

Installation Information:

• Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at installation should be avoided and connecting plumbing should not cause undue loading. The swivel should not be used as a load bearing or structural member.