90° Swivel FP x FP

Hydraulics, Inc – Design Features

• Protective treatment – Zinc Plating with Yellow Chromate RoHS compliant finish


• One-piece investment cast barrel – no braze joint


• Full 4:1 design safety factor


• Standard O-Ring and back up ring – Field replaceable seal kits


• Optional seal material


• Burnished barrel bore – Extends seal life


• Recessed and protected dust seals


• Pressure balanced for low rotational torque


• Heavy duty retainer ring


• Excellent flow characteristics

Pressure Limitations:

• Maximum working pressure for “9S” Series swivels is up to 5,000 psi (34.5 MPa) depending on port options chosen; however, connecting plumbing may be rated higher or lower than that of the swivel. The rated working pressure of a fluid power system should not exceed the lowest rated component therein.

Installation Information:

• Hydraulics, Inc. swivel joints are generally considered for low speed rotation as encountered in fluid power systems. Maximum speed of rotation depends upon system environment, with fluid types and extreme conditions related to temperature and pressure being of prime consideration. Questionable applications should be proven by laboratory or prototype testing. Contamination at installation should be avoided and connecting plumbing should not cause undue loading. The swivel should not be used as a load bearing or structural member.