Thermoid 1/4" Grade R Welding Hose

The Flex Strength Tuline welding hose is lightweight, flexible and available from stock in a wide range of sizes. The hoses come in two popular grades, R and T. Both grades come in single line and tuline styles and corrugated covers available for single line. Each of these styles and grades feature multi-spiral construction for maximum kink resistance. The Grade R hose features an EPDM tube and cover that are heat resistant.

Features

• Temperature Range:: -40°F to +180°F


• Pressureless Cure System:Minimal Cast (Natural Curvature of the Hose). Extends the Life of the Rubber Compounds


• Air Mandrel Manufacturing Process: No Internal Contamination of the Inside Diameter Due to the Lubricant. Eliminates the Need for Customers to Flush the Hose. Conforms to ARPM/CGA Specifications. Capable of Bonding Red & Green Hoses


• Branding: Size, Grade R Acetylene Only Std. Duty KX WP 200 PSI RMA 1P-7-2008 (Date)


• Multi-Ventilation Pores: Disperses Permeating Gases. Enhances Welder’s Safety.

Construction

• Tube: EPDM, ARPM – Class C


• Cover: EPDM, ARPM – Class C


• Reinforcement: 2- or 4-Spiral High Tensile Polyester Yarn. More Flexible than Braid Reinforced Hose. Easier to Route Assemblies. Easier to Coil & Handle. Less Susceptible to Premature Failure than Braided Hose if Subjected to Torque. King Resistant.

Packaging

• Reels, Cut and Coupled Lengths


• 700 ft Reels


• Over 80% One Piece Reels


• Less Scrap