Gates 3/4" Hose M30X2.0 Thread Coupling
Item #: 12G-20MDH
Product Info
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
Features
- The ‘bite-the-wire’ design allows for coupling and hose retention to make a high performance, risk-free hydraulic hose assembly.
- Full-Torque Nut couplings are stronger and more durable than traditional staked nut fittings that are prone to cracking when over-torqued.
- The Full-Torque Nut transfers input-torque to clamp-load more consistently than staked nuts, minimizing leaks.
- MegaCrimp couplings allow you to simplify your inventory by carrying one family of couplings that are qualified on all Gates wire-braid hoses.
- Tested to one million impulse cycles, proving its high performance and maximum service.
Item Specifications
-
MegaCrimp®
-
3/4 Inch
-
Steel
-
DIN Heavy
-
3.43 Inch
-
Straight
-
12
-
TuffCoat™
-
1.417 Inch
-
32 MM
-
Mated Angle w/O-Ring
-
0.787 Inch
-
20 MM
-
24 Degrees
-
20
-
M30x2.0
-
1.26 Inch
-
20
-
MDH
-
On Female w/Inverted Nose Seat
-
Various ODs both 1 & 2-Wire Braid, select Xpiral
-
No
-
Yes
-
0.55 LB
-
0.55 lbs per
