Clean-Cuts™ 7 Inch Hydraulic Hose Saw

Introduction

• Clean-Cuts hydraulic hose cutting system is break-through technology using a toothed blade, cutting with the backs of each tooth, so the blade does not take a kerf.


• The saw bends the hose into the blade spreading the cut edges to avoid burning and smoking.

New Improved Clean-Cuts Method

• With the Clean-Cuts hydraulic hose saws the hose is positioned across two pins (A) and moved into the blade© by a feed foot (B) using a pulldown handle for better leverage on heavy hose.


• The feed motion causes the hose to stretch at the point of contact with the blade, allowing it to separate as it is cut.


• This separation allows the hose to pass clear of the saw blade with NO friction, NO heating and NO DEBRIS!


• A vacuum hose is attached to a vacuum port (D) to remove any tiny amount of debris or smoke during cutting.


• Improved safety using a 110V on/off switch (E) with a magnetic contactor.


• When power is lost, the saw will not turn back on independently.