Browse Categories

Clean-Cuts™ 10 Inch Hydraulic Hose Saw

HYDM100 Bench Mount 10 Inch Saw
Item #: SSHYDM100-220V3

Product Info

Introduction



  • Clean-Cuts hydraulic hose cutting system is break-through technology using a toothed blade, cutting with the backs of each tooth, so the blade does not take a kerf.

  • The saw bends the hose into the blade spreading the cut edges to avoid burning and smoking.


New Improved Clean-Cuts Method



  • With the Clean-Cuts hydraulic hose saws the hose is positioned across two pins (A) and moved into the blade© by a feed foot (B) using extendable handle (D) for better leverage on extremely heavy hose.

  • The feed motion causes the hose to stretch at the point of contact with the blade, allowing it to separate as it is cut.

  • This separation allows the hose to pass clear of the saw blade with NO friction, NO heating and NO DEBRIS!

  • A vacuum hose is attached to a vacuum port to remove any tiny amount of debris or smoke during cutting.


Item Specifications

  • 3 HP, 220 VAC, 3 Phase, 60 Cycle, 3,490 RPM
  • One 10 Inch OD x .125 Thickness X 40 mm Arbor
  • 2 Inch ID x 6 Wire Hydraulic Hose
$4,583.37
-
UOM : EA
QTY:

Have Questions?

Ask our experts: